Jinhu Color Powder Coating Co., Ltd.
Main products:Thermosetting Powder Coating
Contact Us
  • Contact Person : Ms. Wang Terry
  • Company Name : Jinhu Color Powder Coating Co., Ltd.
  • Tel : 0086-25-57909280
  • Address : Jiangsu,NANJING,Hua yuan Road 8#
  • Country/Region : China
  • Zip : 210042

High anti corrosion Epoxy Powder Coating with RoHS standard

High anti corrosion Epoxy Powder Coating with RoHS standard
Product Detailed
1)Stable &high quality 2)ISO 3)Professional after-selling service 4)RoHS

JINHU COLOR POWDER COATING CO.LTD Provides a wide range of anti corrossion epoxy powder coating. 


Specific gravity : 1.2 ~ 1.8g/cm3 up to colorsParticle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)Level of liquidity: 24 ~ 27 mm


180 °C ~ 200 °C (work piece temperature), 10-15 minutes


8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)


Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.


Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.



Mechanical property

Testing items

Standards and methods

Inspecting index

impact strength

GB/T1732-1993, AS3715 2.8  


Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227    

Pass 2-5 millimeters


GB/T9286-88,2mm Cross cut, ISO2409 

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520  

Erichsen, ISO1520    

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi 

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

the GB/T17740-79(89),1000 hours 

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours 

Without air bubbles, the surface without damage 

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour 

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage


QUV-313,500 hours

Gloss higher than 80% lower than the Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light

High anti corrosion Epoxy Powder Coating with RoHS standard

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.